908.561.2100  Request A Quote


Be proactive and keep your manual checks in tip top shape. Following this simple checklist can help prolong the total lifespan of your equipment and help prevent workplace accidents and injuries.

pallet jack check list

1. Visual Check

Check for structural deformation or cracks of arms, forks or any other component.

2. Push-rods

Verify that push-rods beneath each fork are accurately adjusted to ensure that forks are level.

3. Cracked Seals

Seals within the pump can crack over time or dry up due to non-use of the truck. Leaking oil is often a sign of a cracked seal. This can be remedied by replacing the damaged seal.

4. Oil Level

Check to ensure that the pump has sufficient oil in the reservoir. If oil is too low or too high, the truck may not work properly. Add or drain oil as needed.

5. Handle Chain/Nut

Check that the chain is securely fastened to the foot level using two nuts. If chain is loose or has become detached, the handle release lever will not function.

6. Grease Fittings

Check that all grease fittings are properly lubricated. Apply additional grease as needed.

7. Steer Wheels/Load Rollers

Check for high wear or peeling of polyurethane that occur over time or from use on rough surfaces.

8. Bearings

Check to ensure that bearings are well lubricated and functioning properly. Bearings can become de-lubricated over time or from use in wet applications.

If you’re in need of a new pallet jack, Barclay offers the opportunity to get top of the line equipment while helping Operation Homefront Tri-State, a charity that focuses on aiding troops and their families. With the purchase of any hydraulic pallet jack 10% of the proceeds will be donated to help support local soldiers who are returning home from overseas duty. Contact us today for more information.